Grab your Discounted CarPal™ 9L Vacuum Oil Fluid Suction Extractor Changer Manual Fuel Pump Tank Remover while the Store LAUNCH DISCOUNT is on!

Free Shipping Now 3-8 Days!

SHIPS DIRECT FROM OUR USA WAREHOUSE

The CarPal™ 9L Vacuum Oil Fluid Suction Extractor Changer Manual Fuel Pump Tank Remover is a Manual Oil / Fluid Extractor device constructed from composite materials and suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery. It is very quick and easy to use. Supplied with brake tube and rubber fitting, Extracting tube and main suction tube. Avoids searching for drain plug keys and getting under the vehicle. Can also be used for draining fish tanks, basins and sinks.

Muti-size hose

•  Suction Probes: Ø4, Ø6, Ø10, and 1pc of Ø4 brass probe) probe length 1M

New model with stronger base

Multiple Uses

• Suitable for the extraction of all types of engine, transmission and lubricating oils from cars, motorcycles, marine engines, stationary engines and industrial machinery.
• Don’t use gasoline in this product or any dangerous chemicals

How To Use

1. Warm up the oil by running the engine-This will allow the contaminates to mix and to suspend in the oil. Remove the dipstick. Note: If you can't hold the dipstick comfortably in your hands, then the oil is too hot! Wait for the oil to cool off a bit
2. Select and insert the appropriate diameter extraction tube into the dipstick pipe until it touches the bottom of the oil pan. Connect the main tube to the top of the unit and to the extraction tube
3. Pump the handle 4 to 10 times in a row to start the vacuum. The unit will extract the oil automatically. Continuous pumping is not required
4. After all the oil has been extracted, press the release valve located at the top of the unit for 5 seconds. Remove the main tube. When pouring the oil into a container, hold the pump, and pour gently. Do not hold it upside down! Bring the used oil to a recycling depot

CarPal™ Vacuum Oil Extractor 9L Pump Fluid Suction Manual  Features:

• Muti-size hose: change different sizes for different condition
• Evacuates All Types Of Fluid Such As Engine Oil, Transmission Fluids, And Gear Oil Coolants
• All new updated model with stronger base!!
• Ingenious vacuum device.
• Probes can be stored in the holder when not in use.
• To remove oil from a car engine, simply push the probe down the dipstick hole and pump the handle on the top of the unit.
• Sets up a permanent fluid transfer while you do something else.
• Avoids searching for drain plug keys and getting under the vehicle.
• Can also be used for draining fish tanks, basins and sinks.

CarPal™ Vacuum Oil Extractor 9L Pump Fluid Suction Manual Specification:

• Capacity: 9L
• Suction Port: 32mm
• Suction Probes: Ø4, Ø6, Ø10, and 1pc of Ø4 brass probe) probe length 1M
• Main Material: ABS with Aluminium inflator.

Package includes

• 1pc manual oil pump (with 4 tubes)
• 1pc manual instruction